175/35R19 vs 175/40R19
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
175/35R19
- Section width
- 175 mm
- Aspect ratio
- 35%
- Rim
- 19"
- Sidewall
- 61.3 mm
- Overall diameter
- 605.1 mm
- Revs / mile
- 847
175/40R19
- Section width
- 175 mm
- Aspect ratio
- 40%
- Rim
- 19"
- Sidewall
- 70.0 mm
- Overall diameter
- 622.6 mm
- Revs / mile
- 823
Difference
- Overall diameter
- +17.5 mm (+2.89%)
- Sidewall
- +8.8 mm
- Tread width
- +0 mm
- Ride height (axle)
- +8.8 mm
- Speedometer error
- +2.89%
- At indicated 60 mph
- actual 61.74 mph
Will 175/40R19 fit instead of 175/35R19?
The overall diameter changes by 2.89%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).