165/55R18 vs 165/60R18
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
165/55R18
- Section width
- 165 mm
- Aspect ratio
- 55%
- Rim
- 18"
- Sidewall
- 90.8 mm
- Overall diameter
- 638.7 mm
- Revs / mile
- 802
165/60R18
- Section width
- 165 mm
- Aspect ratio
- 60%
- Rim
- 18"
- Sidewall
- 99.0 mm
- Overall diameter
- 655.2 mm
- Revs / mile
- 782
Difference
- Overall diameter
- +16.5 mm (+2.58%)
- Sidewall
- +8.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +8.3 mm
- Speedometer error
- +2.58%
- At indicated 60 mph
- actual 61.55 mph
Will 165/60R18 fit instead of 165/55R18?
The overall diameter changes by 2.58%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).